Table of Contents
Advertisement
To access this page, click Switching > VLAN > RSPAN.
The following table describes the items in the previous figure.
Item
RSPAN VLAN
Submit
Refresh
Cancel
4.4.21
IP Subnet Based VLAN
4.4.21.1
Status
Use the IP Subnet Based VLAN Status page to add, edit, and remove IP subnet-
based VLANs. IP subnet-based VLANs allow incoming untagged packets to be
assigned to a VLAN based on the source IP address of the packet. All hosts in the
same subnet are members of the same VLAN.
To access this page, click Switching > IP Subnet Based VLAN > Status.
Figure 4.260 Switching > IP Subnet Based VLAN > Status
The following table describes the items in the previous figure.
Item
IP Address
Subnet Mask
VLAN ID
Refresh
Add
Edit
Remove
EKI-9500 Series User Manual
Figure 4.259 Switching > VLAN > Status
Description
Click the drop-down menu to select the VLAN to use as the RSAN
VLAN.
Click Submit to save the values and update the screen.
Click Refresh to update the screen.
Click Cancel to restore default value.
Description
The network address for the IP subnet. All incoming untagged packets
that have a source IP address within the defined subnetwork are
placed in the same VLAN.
The subnet mask that defines the network portion of the IP address.
The VLAN ID of the IP subnet-based VLAN. If the source IP address of
untagged traffic received on any port or LAG is within the associated IP
subnet, the traffic is tagged with this VLAN ID.
Click Refresh to update the screen.
Click Add to add a new IP subnet-based VLAN.
Click Edit to edit the selected entries.
Click Remove to remove the selected entries.
234
Advertisement
Table of Contents
