Table of Contents
Advertisement
Item
Direction
Status
Policy
Refresh
Add
Edit
Remove
To add a policy to an interface:
Click QoS > Diffserv > Service Summary > Add.
Figure 4.331 QoS > Diffserv > Service Summary > Add
The following table describes the items in the previous figure.
Item
Interface
Policy In
Submit
Cancel
4.7.3.7
Service Statistics
The Diffserv Service Performance Statistics page displays service-level statistical
information for all interfaces in the system to which a DiffServ policy has been
attached.
To access this page, click QoS > Diffserv > Service Statistics.
Description
The traffic flow direction to which the policy is applied:
Inbound: The policy is applied to traffic as it enters the interface.
Outbound: The policy is applied to traffic as it exits the interface.
The status of the policy on the interface. A policy is Up if DiffServ is
globally enabled, and if the interface is administratively enabled and
has a link. Otherwise, the status is Down.
The DiffServ policy associated with the interface.
Click Refresh to update the screen.
Click Add to add a policy to an interface.
Click Edit to edit the selected entries.
Click Remove to remove the selected entries.
Description
Select an interface to associate with a policy.
The menu lists all policies configured with a type of In. Select the policy
to apply to traffic as it enters the interface.
Click Submit to save the values.
Click Cancel to close the window.
Figure 4.332 QoS > Diffserv > Service Statistics
305
EKI-9500 Series User Manual
Advertisement
Table of Contents
