Table of Contents
Advertisement
Item
Description
Clear Counters
Click Clear Counters to reset the selected counters to zero.
Clear All Counters
Click Clear All Counters to reset all counters to zero.
Port Detailed
The Port Detailed Statistics page shows detailed information about the traffic trans-
mitted and received by each interface.
To access this page, click System > Statistics > System > Port Detailed.
Figure 4.128 System > Statistics > System > Port Detailed
The following table describes the items in the previous figure.
Item
Description
Interface
Identifies the port or LAG. To view the statistics for a specific interface,
select the interface number from the drop-down menu. The page
automatically refreshes with the statistics for the selected interface.
Maximum Frame
The maximum Ethernet frame size the interface supports or is config-
Size
ured to support. The maximum frame size includes the Ethernet
header, CRC, and payload.
Packet Lengths
The table shows how many packets of certain lengths have been
Received and Trans-
received and transmitted by the interface.
mitted
Basic
The table shows basic information about the types of packets
received or transmitted by the selected interface. Statistics for trans-
mitted traffic and received traffic are shown in separate columns.
Unicast Packets
Packets sent from one network point to a single network destination.
The receiver is identified by an IP address within the range 1.1.1.1-
223.255.255.255.
Multicast Packets
Packets sent from multiple network points to one or more network
destinations.
Broadcast Packets
Packets sent from one network point to all other network destinations.
Total Packets
Total number of packets sent or recived (meaured in Octets).
(Octets)
Packets > 1518
Total number of packets sent or received which were longer than 1518
Octets
Octets in size.
802.3x Pause
Ethernet flow control mechanism; Pause Frames are used to stop
Frames
sender transmission for a specified duration.
125
EKI-9500 Series User Manual
Advertisement
Table of Contents
