Figure 4.301Security > Radius > Clear Statistics - Advantech EKI-9516P-HV User Manual

To access this page, click Security > RADIUS > Clear Statistics.
The following table describes the items in the previous figure.
Item
Reset
4.6.2.7 Source Interface Configuration
Use the RADIUS Source Interface Configuration page to specify the physical or logi-
cal interface to use as the RADIUS client source interface. When an IP address is
configured on the source interface, this address is used for all RADIUS communica-
tions between the local RADIUS client and the remote RADIUS server. The IP
address of the designated source interface is used in the IP header of RADIUS man-
agement protocol packets. This allows security devices, such as firewalls, to identify
all source packets coming from a specific device.
To access this page, click Security > RADIUS > Source Interface Configuration.
Figure 4.302 Security > RADIUS > Source Interface Configuration
The following table describes the items in the previous figure.
Item
Type
Interface
VLAN ID
Submit
Refresh
Cancel
4.6.3 TACACS+
4.6.3.1 Configuration
Use the TACACS+ Configuration page to setup accounting information and adminis-
tration control over authentication and authorization between the TACACS+ server
and the device.
EKI-9500 Series User Manual
Figure 4.301 Security > RADIUS > Clear Statistics
Description
Click Reset to clear all RADIUS authentication and RAIDUS account-
ing server statistics.
Description
The type of interface to use as the source interface:

None: The primary IP address of the originating (outbound) inter-
face is used as the source address.

Interface: The primary IP address of a physical port is used as
the source address.

VLAN: The primary IP address of a VLAN routing interface is
used as the source address.
When the selected Type is Interface, select the physical port to use as
the source interface.
When the selected Type is VLAN, select the VLAN to use as the
source interface. The menu contains only the VLAN IDs for VLAN rout-
ing interfaces.
Click Submit to save the values and update the screen.
Click Refresh to update the screen.
Click Cancel to restore default value.
274