Passwords - Advantech EKI-9516P-HV User Manual

Item
Refresh
Cancel
4.3.9

Passwords

4.3.9.1 Line Password
Use the Line Password Configuration page to configure line mode passwords.
To access this page, click System > Passwords > Line Password.
The following table describes the items in the previous figure.
Item
Line Mode
Password
Confirm Password
Submit
Refresh
Cancel
4.3.9.2 Enable Password
Use the Enable Password Configuration page to configure the enable password.
To access this page, click System > Passwords > Enable Password.
Figure 4.114 System > Passwords > Enable Password
The following table describes the items in the previous figure.
Item
Enable Password
Confirm Enable
Password
Submit
EKI-9500 Series User Manual
Description
Click Refresh to update the screen.
Click Cancel to restore default value.
Figure 4.113 System > Passwords > Line Password
Description
Any or all of the following passwords may be changed on this page by
checking the box that precedes it:

Console

Telnet

SSH
Enter the new password for the corresponding Line Mode in this field.
Be sure the password conforms to the allowed number of characters.
The password characters are not displayed on the page, but are dis-
guised in a browser-specific manner.
Re-enter the new password for the corresponding Line Mode in this
field. This must be the same value entered in the Password field. Be
sure the password conforms to the allowed number of characters. The
password characters are not displayed on the page, but are disguised
in a browser-specific manner.
Click Submit to save the values and update the screen.
Click Refresh to update the screen.
Click Cancel to restore default value.
Description
Specify the password all users must enter after executing the enable
command at the CLI prompt.
Type the password again to confirm that you have entered it correctly.
Click Submit to save the values and update the screen.
112