Server > Pool Summary > Add - Advantech EKI-9516P-HV User Manual

The following table describes the items in the previous figure.
Item
Name
Type
Network
Lease Time
Refresh
Add
Remove
To add a new DHCP server pool:
Click System > Advanced Configuration > DHCP Server > Pool Summary > Add.
Figure 4.14 System > Advanced Configuration > DHCP Server > Pool Summary
The following table describes the items in the previous figure.
Item
Name
Type of Binding
EKI-9500 Series User Manual
Description
The name that identifies the DHCP server pool.
The type of binding for the pool. The options are:

Manual: The DHCP server assigns a specific IP address to the
client based on the client's MAC address. This type is also
known as Static.

Dynamic: The DHCP server can assign the client any available
IP address within the pool. This type is also known as Auto-
matic.

Undefined: The pool has been created by using the CLI, but the
pool information has not been configured.
For a Manual pool, indicates the host IP address to assign the client.
For a Dynamic pool, indicates the network base address.
The amount of time the information the DHCP server allocates is
valid.
Click Refresh to update the screen.
Click Add to add a new DHCP server pool.
Click Remove to remove the selected entries.
> Add
Description
The name that identifies the DHCP server pool.
The type of binding for the pool. The options are:

Manual

Dynamic
The binding type you select determines the fields that are available to
configure.
34