Advantech EKI-9516P-HV User Manual page 110

The following table describes the items in the previous figure.
Item Description
Network Configura- Specify how the device acquires network information on the network
tion Protocol interface:



DHCP Client Identi- The DHCP Client Identifier (Option 61) is used by DHCP clients to
fier specify their unique identifier. DHCP servers use this value to index
their database of address bindings. This value is expected to be
unique for all clients in an administrative domain. The Client Identifier
string will be displayed beside the check box once DHCP is enabled
on the port on which the Client Identifier option is selected. This web
page will need to be refreshed once this change is made.
IP Address The IP address of the interface. If the Network Configuration Protocol
is None, you can manually configure a static IP address. If the Net-
work Configuration Protocol is BOOTP or DHCP, this field displays the
IP address that was dynamically acquired (if any).
Subnet Mask The IP subnet mask for the interface. If the Network Configuration
Protocol is None, you can manually configure a static subnet mask. If
the Network Configuration Protocol is BOOTP or DHCP, this field dis-
plays the subnet mask that was dynamically acquired (if any).
Default Gateway The default gateway for the IP interface. If the Network Configuration
Protocol is None, you can manually configure the IP address of the
default gateway. If the Network Configuration Protocol is BOOTP or
DHCP, this field displays the default gateway address that was
dynamically acquired (if any).
MAC Address Type Specify whether the burned in or the locally administered MAC
address should be used for in-band connectivity.
Burned In MAC The burned in MAC address used for in-band connectivity if you
Address choose not to configure a locally administered address.
Locally Administered You may configure a locally administered MAC address for in-band
MAC Address connectivity instead of using the burned in universally administered
MAC address. In addition to entering an address in this field, you must
also set the MAC address type to locally administered. Enter the
address as twelve hexadecimal digits (6 bytes) with a colon between
each byte. Bit 6 of byte 0 must be set to 1 and bit 0 to 0, i.e. byte 0
must have a value of 2, 6, A or E for its second digit.
Management VLAN The VLAN ID for the management VLAN. Some network administra-
ID tors use a management VLAN to isolate system management traffic
from end-user data traffic.
Submit Click Submit to save the values and update the screen.
Refresh Click Refresh to update the screen.
Cancel Click Cancel to restore default value.
None: The device does not attempt to acquire network informa-
tion dynamically. Select this option to configure a static IP
address, subnet mask, and default gateway.
BOOTP: During the next boot cycle, the BOOTP client on the
device broadcasts a BOOTP request in an attempt to acquire
information from a BOOTP server on the network.
DHCP: During the next boot cycle, the DHCP client on the
device broadcasts a DHCP request in an attempt to acquire
information from a DHCP server on the network. After this option
is applied, you can use the Refresh icon at the end of the row to
renew the IPv4 address learned from DHCP server.
91 EKI-9500 Series User Manual