Figure 4.89 System > Connectivity > Ipv6 Neighbors - Advantech EKI-9516P-HV User Manual

Item
Dynamic IPv6
Addresses
Default IPv6 Routers Lists the IPv6 address of each default router that has been automati-
Submit
Refresh
Cancel
4.3.5.3 IPv6 Neighbors
When IPv6 is enabled on the service port, and a ping is initiated to a neighbor, the
neighbor is added to the cache (if successful). The Network Port IPv6 Neighbors
page displays data on these ports.
To access this page, click System > Connectivity > IPv6 Neighbors.
The following table describes the items in the previous figure.
Item
IPv6 Address
MAC Address
Type
Is Router
Neighbor State
Last Updated
Refresh
Description
Lists the IPv6 addresses on the network interface that have been
dynamically configured through IPv6 auto configuration or DHCPv6.
cally configured through IPv6 router discovery.
Click Submit to save the values and update the screen.
Click Refresh to update the screen.
Click Cancel to restore default value.
Figure 4.89 System > Connectivity > IPv6 Neighbors
Description
The IPv6 address of a neighbor device that has been reachable on
the local link through the network interface.
The MAC address of the neighboring device.
The type of the neighbor entry, which is one of the following:

Static: The neighbor entry is manually configured.

Dynamic: The neighbor entry is dynamically resolved.

Local: The neighbor entry is a local entry.

Other: The neighbor entry is an unknown entry.
Identifies whether the neighbor device is a router. The possible values
are:

True: The neighbor device is a router.

False: The neighbor device is not a router.
The current reachability state of the neighboring device, which is one
of the following:

Reachable: The neighbor is reachable through the network
interface.

Stale: The neighbor is not known to be reachable, and the sys-
tem will begin the process to reach the neighbor.

Delay: The neighbor is not known to be reachable, and upper-
layer protocols are attempting to provide reachability informa-
tion.

Probe: The neighbor is not known to be reachable, and the
device is attempting to probe for this neighbor.

Unknown: The reachability status cannot be determined.
The amount of time that has passed since the neighbor entry was last
updated.
Click Refresh to update the screen.
93 EKI-9500 Series User Manual