Table of Contents
Advertisement
Item
Minimum Character
Classes
Exclude Keyword
Name
Submit
Refresh
Cancel
4.3.9.4
Last Password
Use the Last Password Result page view information about the last attempt to set a
user password. If the password set was unsuccessful, a reason for the failure is
given.
To access this page, click System > Passwords > Last Password.
The following table describes the items in the previous figure.
Item
Last Result
Strength Check
Refresh
4.3.9.5
Reset Passwords
Use the Reset Passwords page to reset all system login passwords to factory default
values. When you click Reset, the reset action is initiated.
EKI-9500 Series User Manual
Description
This minimum number of character classes, defined as the various
password strength categories listed above, that must be met in order
for a password to be considered valid. It is permissible, therefore, to
define strength checking criteria for each of the different types of con-
ditions, but only require a valid password to meet some of them. The
number of these character classes that must be met is specified by
this value.
The list of keywords that a valid password must not contain. Excluded
keyword checking is case-insensitive. Additionally, a password cannot
contain the backwards version of an excluded keyword. For example,
if pass is an excluded keyword, passwords such as 23passA2c, ssap-
word, and PAsSwoRD are prohibited. Use the plus and minus buttons
to perform the following tasks:
To add a keyword to the list, click
exclude in the Exclude Keyword Name field, and click Submit.
To remove a keyword from the list, click
with the keyword to remove and confirm the action.
To remove all keywords from the list, click
header row and confirm the action.
Click Submit to save the values and update the screen.
Click Refresh to update the screen.
Click Cancel to restore default value.
Figure 4.116 System > Passwords > Last Password
Description
Displays information about the last (User/Line/Enable) password con-
figuration result. If the field is blank, no passwords have been config-
ured on the device. Otherwise, the field shows that the password was
successfully set or provides information about the type of password
configuration that failed and why it could not be set.
Displays Enabled if Strength Check is applied in last password
change, otherwise it displays Disabled.
Click Refresh to update the screen.
button, type the word to
114
button associated
button in the
Advertisement
Table of Contents
