Figure 4.275Routing > Arp Table > Summary > Add - Advantech EKI-9516P-HV User Manual

To add a new static ARP entry:
Click Routing > ARP Table > Summary > Add.
Figure 4.275 Routing > ARP Table > Summary > Add
The following table describes the items in the previous figure.
Item
IP Address
MAC Address
Submit
Cancel
4.5.1.2 Configuration
Use the ARP Table Configuration page to change the configuration parameters for
the Address Resolution Protocol Table. You can also use this screen to display the
contents of the table.
To access this page, click Routing > ARP Table > Configuration.
The following table describes the items in the previous figure.
Item
Age Time (Seconds) The amount of time, in seconds, that a dynamic ARP entry remains in
Response Time
(Seconds)
Retries
Cache Size
Dynamic Renew
Submit
Refresh
Cancel
Description
The IP address of a network host on a subnet attached to one of the
device's routing interfaces.
The unicast MAC address (hardware address) associated with the net-
work host.
Click Submit to save the values.
Click Cancel to close the window.
Figure 4.276 Routing > ARP Table > Configuration
Description
the ARP table before aging out.
The amount of time, in seconds, that the device waits for an ARP
response to an ARP request that it sends.
The maximum number of times an ARP request will be retried after an
ARP response is not received. The number includes the initial ARP
request.
The maximum number of entries allowed in the ARP table. This num-
ber includes all static and dynamic ARP entries.
When selected, this option allows the ARP component to automatically
attempt to renew dynamic ARP entries when they age out.
Click Submit to save the values and update the screen.
Click Refresh to update the screen.
Click Cancel to restore default value.
247 EKI-9500 Series User Manual