Figure 4.7 System > Aaa > Accounting List - Advantech EKI-9516P-HV User Manual

The following table describes the items in the previous figure.
Item
Terminal
Console
Telnet
SSH
Submit
Refresh
Cancel
4.3.1.3 Accounting List
Use the Accounting List Configuration page to view and configure the accounting lists
for users who access the command-line interface (CLI) to manage and monitor the
device. Accounting lists are used to record user activity on the device. The device is
preconfigured with accounting lists. These are default lists, and they cannot be
deleted. Additionally, the List Name and Accounting Type settings for the default lists
cannot be changed.
To access this page, click System > AAA > Accounting List.
The following table describes the items in the previous figure.
Item
Accounting Type
List Name
Record Type
Description
The Login authentication list and the Enable authentication list to
apply to users who attempt to access the CLI by using a connection to
the console port.
The Login authentication list and the Enable authentication list to
apply to users who attempt to access the CLI by using a Telnet ses-
sion.
The Login authentication list and the Enable authentication list to
apply to users who attempt to access the CLI by using a secure shell
(SSH) session.
Click Submit to save the values and update the screen.
Click Refresh to update the screen.
Click Cancel to restore default value.
Figure 4.7 System > AAA > Accounting List
Description
The type of accounting list, which is one of the following:

Command: Each CLI command executed by the user, along with
the time the command was executed, is recorded and sent to an
external AAA server.

Exec: User login and logout times are recorded and sent to an
external AAA server.
The name of the accounting list. This field can be configured only
when adding a new accounting list.
Indicates when to record and send information about the user activity:

StartStop: Accounting notifications are sent at the beginning and
at the end of an exec session or a user-executed command.
User activity does not wait for the accounting notification to be
recorded at the AAA server.

StopOnly: Accounting notifications are sent at the end of an
exec session or a user-executed command.
29 EKI-9500 Series User Manual