Users - Advantech EKI-9516P-HV User Manual

Item
Status
Refresh
4.3.15

Users

4.3.15.1 Accounts
By default, the switch contains two user accounts:

admin, with 'Read/Write' privilege

user, with 'Read Only' privileges
Admin account's password is also admin by default. User account's password is also
user by default.
If you log on to the switch with the user account that Read/Write privileges (i.e., as
admin), you can use the User Accounts page to assign passwords and set security
parameters for the default accounts. You can also add up to five read-only accounts.
You can delete all accounts except for the Read/Write account.
Note! Only a user with Read/Write privileges may alter data on this screen,
and only one account can exist with Read/Write privileges.
To access this page, click System > Users > Accounts.
The following table describes the items in the previous figure.
Item
User Name
EKI-9500 Series User Manual
Description
Provides information about the entry and why it is in the table, which
can be one of the following:

Static: The address has been manually configured and does not
age out.

Learned: The address has been automatically learned by the
device and can age out when it is not in use. Dynamic
addresses are learned by examining information in incoming
Ethernet frames.

Management: The burned-in MAC address of the device.

Self: The MAC address belongs to one of the device's physical
interfaces.

GMRP Learned: The address was added dynamically by the
GARP Multicast Registration Protocol (GMRP).

Other: The address was added dynamically through an unidenti-
fied protocol or method.

Unknown: The device is unable to determine the status of the
entry.
Click Refresh to update the screen.
Figure 4.142 System > Users > Accounts
Description
A unique ID or name used to identify this user account.
138