Page 1
User Manual EKI-6528TI/ 6528TPI EN50155 8-port M12 Unmanaged/ PoE Switch with Wide Temperature...
Page 2
No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. How- ever, Advantech Co., Ltd.
This product has passed the CE test for environmental specifications when shielded cables are used for external wiring. We recommend the use of shielded cables. This kind of cable is available from Advantech. Please contact your local supplier for ordering information.
Page 4
The sound pressure level at the operator's position according to IEC 704-1:1982 is no more than 70 dB (A). DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein.
Introduction EKI-6528TI and EKI-6528TPI are EN50155 compliant industrial switches with IP40 protection and wide temperature support designed for railway applications. EKI- 6528TPI provides 4 x PoE ports that support IEEE 802.3af and can provide up to 15.4 watts of power per port. M12 connectors ensure highly reliable connectivity for industrial communication applications.
Page 9
Vibration IEC61373 Packing List Before installation, please make sure that you have received the following: 1 x EKI-6528TI/ 6528TPI Industrial Unmanaged Ethernet Switch 2 x Wall-mount plates with screws 1 x DIN-rail clip with screws ...
LED indicators located on the front panel display the status of system power, net- working and power feeding over Ethernet of the Ethernet switch. Please refer to the following table for further details. Table 2.1: EKI-6528TI LED Definitions Color Description PWR1...
The EKI-6528T/TPI supports two mounting methods: DIN-rail & Wall. 2.3.1 Wall mounting Attach the brackets included to the switch with screws. With the brackets attached, hang the switch to nails on the wall. Figure 2.2 Attaching the Metal Mounting Kit EKI-6528TI/ 6528TPI User Manual...
The M-12 D-coded Fast Ethernet ports are auto-sensing for 10Base-T or 100Base-TX devices connections. Auto MDI/MDIX means that you can connect to another switch or workstation without changing straight through or crossover cabling. 1: TX+ 2: RX+ 3: TX- 4: RX- Figure 2.4 Network Connector EKI-6528TI/ 6528TPI User Manual...
1: V1- 2: V2- 3: V2+ 4: V1+ Figure 2.5 Power Connector Grounding the Ethernet Switch Follow the instructions below to attach the Ethernet switch to ground. Dome Screw for Grounding Figure 2.6 Grounding Screws EKI-6528TI/ 6528TPI User Manual...
If you still cannot resolve the problem, contact your local dealer for assistance. If the LED indicators are normal while the corresponding cables are connected correctly but the networking is still inactive, please check your system’s Ethernet devices’ configuration or status. EKI-6528TI/ 6528TPI User Manual...
Need help?
Do you have a question about the EKI-6528TI and is the answer not in the manual?
Questions and answers