Table of Contents
Advertisement
Item
Description
VLAN
The VLAN ID associated with the PBVLAN. VLAN tagging for the PBV-
LAN works as follows:
Protocol
The protocol or protocols to use as the match criteria for an Ethernet
frame. The protocol is included in the two-byte EtherType field of the
frame. When adding a PBVLAN, you can specify the EtherType hex
value or (for IP, ARP, and IPX) the protocol keyword.
Interface
The interfaces that are members of the PBVLAN group. An interface
can be a member of multiple groups as long as the same protocol is
not specified in more than one group that includes the interface. When
adding a PBVLAN group, use the Available Interfaces and Group Inter-
faces fields to configure the interfaces that are members of the PBV-
LAN group. To move an interface between the Available Interfaces and
Group Interfaces fields, click the interface (or CTRL + click to select
multiple interfaces), and then click the appropriate arrow to move the
selected interfaces to the desired field.
Refresh
Click Refresh to update the screen.
Add
Click Add to add a new protocol based VLAN.
Remove
Click Remove to remove the selected entries.
To add a new protocol based VLAN:
Click Switching > Protocol Based VLAN > Status > Add.
Figure 4.265 Switching > Protocol Based VLAN > Status > Add
If the frame received over a port is tagged, normal processing
takes place.
If the frame received over a port is untagged, the frame type is
matched according to the protocol(s) assigned to the group on
that port.
–
If a match is found, the frame is assigned the VLAN ID speci-
fied for the group.
–
If a match is not found, the frame is assigned the port VID
(PVID) as its VLAN ID.
237
EKI-9500 Series User Manual
Advertisement
Table of Contents
