Figure 4.102System > Logs > Hosts > Add - Advantech EKI-9516P-HV User Manual

Click System > Logs > Hosts > Add.
The following table describes the items in the previous figure.
Item
IP Address/Host
Name
Port
Severity Filter
Submit
Cancel
4.3.7.5 Configuration
The Log Configuration page allows administrators with the appropriate privilege level
to configure the administrative mode and various settings for logging features on the
switch.
To access this page, click System > Logs > Configuration.
The following table describes the items in the previous figure.
Item
Buffered Log Configuration
Admin Mode
Behavior
Command Logger Configuration
Admin Mode
Figure 4.102 System > Logs > Hosts > Add
Description
The IP address or DNS-resolvable host name of the remote host to
receive log messages.
The UDP port on the logging host to which syslog messages are sent.
Severity level threshold for log messages. All log messages with a
severity level at and above the configured level are forwarded to the
logging host.
Click Submit to save the values.
Click Cancel to close the window.
Figure 4.103 System > Logs > Configuration
Description
Enable or disable logging to the buffered (RAM) log file.
Specify what the device should do when the buffered log is full. It can
either overwrite the oldest messages (Wrap) or stop writing new mes-
sages to the buffer (Stop on Full).
Enable or disable logging of the command-line interface (CLI) com-
mands issued on the device.
103 EKI-9500 Series User Manual