Table of Contents
Advertisement
Item
Description
Group Membership
The number of seconds the VLAN should wait for a report for a particu-
Interval
lar group on the VLAN before the MLD snooping feature deletes the
VLAN from the group.
Max Response Time The number of seconds the VLAN should wait after sending a query if
does not receive a report for a particular group. The specified value
should be less than the Group Membership Interval.
Multicast Router
The number of seconds the VLAN should wait to receive a query
Expiration Time
before it is removed from the list of VLANs with multicast routers
attached.
Fast Leave Admin
The administrative mode of Fast Leave on the VLAN. If Fast Leave is
Mode
enabled, the VLAN can be immediately removed from the Layer 2 for-
warding table entry upon receiving an MLD leave message for a multi-
cast group without first sending out MAC-based general queries.
Refresh
Click Refresh to update the screen.
Add
Click Add to enable MLD snooping on a VLAN.
Edit
Click Edit to edit the selected entries.
Remove
Click Remove to disable MLD snooping for the selected entries.
To enable MLD snooping on a VLAN:
Click Switching > MLD Snooping > VLAN Status > Add.
Figure 4.208 Switching > MLD Snooping > VLAN Status > Add
The following table describes the items in the previous figure.
Item
Description
VLAN ID
The VLAN associated with the rest of the data in the row. When
enabling MLD snooping on a VLAN, use this menu to select the
desired VLAN. Only VLANs that have been configured on the system
and are not already enabled for MLD snooping appear in the menu.
When modifying MLD snooping settings, this field identifies the VLAN
that is being configured.
Group Membership
The number of seconds the VLAN should wait for a report for a particu-
Interval (Seconds)
lar group on the VLAN before the MLD snooping feature deletes the
VLAN from the group.
Max Response Time
The number of seconds the VLAN should wait after sending a query if
(Seconds)
does not receive a report for a particular group. The specified value
should be less than the Group Membership Interval.
Multicast Router
The number of seconds the VLAN should wait to receive a query
Expiration Time
before it is removed from the list of VLANs with multicast routers
(Seconds)
attached.
191
EKI-9500 Series User Manual
Advertisement
Table of Contents
