Management Access - Advantech EKI-9516P-HV User Manual

4.3.8

Management Access

4.3.8.1 System
Use the System Connectivity page to control access to the management interface by
administratively enabling or disabling various access methods.
To access this page, click System > Management Access > System.
Figure 4.106 System > Management Access > System
The following table describes the items in the previous figure.
Item
HTTP
HTTP Admin Mode
Java Mode
Telnet
Telnet Server Admin
Mode
Allow New Sessions Enables or disables new telnet sessions. When this option is disabled,
Secure HTTP
HTTPS Admin Mode Enables or disables the administrative mode of secure HTTP. When
Secure Shell
SSH Admin Mode
Submit
Refresh
Cancel
4.3.8.2 Telnet
Telnet is a terminal emulation TCP/IP protocol. ASCII terminals can be virtually con-
nected to the local device through a TCP/IP protocol network. Telnet is an alternative
to a local login terminal where a remote login is required.
The switch supports up to five simultaneous telnet sessions. All CLI commands can
be used over a telnet session.
EKI-9500 Series User Manual
Description
Enables or disables the HTTP administrative mode. When this mode
is enabled, the device management interface can be accessed
through a web browser using the HTTP protocol.
Enables or disables the port that Java uses. When this mode is dis-
abled, any feature on the device that uses Java is not available and
cannot be viewed by using a web browser.
Enables or disables the telnet administrative mode. When this mode
is enabled, the device command-line interface (CLI) can be accessed
through the telnet port. Disabling this mode disconnects all existing
telnet connections and shuts down the telnet port in the device.
the system does not accept any new telnet sessions, but existing tel-
net sessions are unaffected.
this mode is enabled, the device management interface can be
accessed through a web browser using the HTTPS protocol.
Enables or disables the administrative mode of SSH. When this mode
is disabled, all existing SSH connections remain connected until
timed-out or logged out, but new SSH connections cannot be estab-
lished.
Click Submit to save the values and update the screen.
Click Refresh to update the screen.
Click Cancel to restore default value.
106