Ip Mapping > Add - Advantech EKI-9516P-HV User Manual

Item
IP Address
Total Time
Elapsed Time
Dynamic Type
Refresh
Add
Remove
To add a new DNS entry:
Click System > Advanced Configuration > DNS > IP Mapping > Add.
Figure 4.24 System > Advanced Configuration > DNS > IP Mapping > Add
The following table describes the items in the previous figure.
Item
Host Name
IP Address
Submit
Cancel
Source Interface Configuration
Use the DNS Source Interface Configuration page to specify the physical or logical
interface to use as the DNS client source interface. When an IP address is configured
on the source interface, this address is used for all DNS communications between
the local DNS client and the remote DNS server. The IP address of the designated
source interface is used in the IP header of DNS management protocol packets. This
allows security devices, such as firewalls, to identify all source packets coming from a
specific device.
EKI-9500 Series User Manual
Description
The IPv4 or IPv6 address associated with the configured Host Name.
For Static entries, specify the IP Address after you click Add. You can
specify either an IPv4 or an IPv6 address.
The number of seconds that the entry will remain in the table. The
function is only available for Dynamic entries.
The number of seconds that have passed since the entry was added
to the table. When the Elapsed Time reaches the Total Time, the entry
times out and is removed from the table. The function is only available
for Dynamic entries.
The type of address in the entry, for example IP or (less common)
X.121. The function is only available for Dynamic entries.
Click Refresh to update the screen.
Click Add to add a new DNS entry.
Click Remove to remove the selected entries.
Description
The name that identifies the system. For Static entries, specify the
Host Name after you click Add. A host name can contain up to 255
characters if it contains multiple levels in the domain hierarchy, but
each level (the portion preceding a period) can contain a maximum of
63 characters. If the host name you specify is a single level (does not
contain any periods), the maximum number of allowed characters is
63.
The IPv4 or IPv6 address associated with the configured Host Name.
For Static entries, specify the IP Address after you click Add. You can
specify either an IPv4 or an IPv6 address.
Click Submit to save the values.
Click Cancel to close the window.
44