Figure 4.132System > Statistics > Time Based > Flow Based - Advantech EKI-9516P-HV User Manual

To access this page, click System > Statistics > Time Based > Flow Based.
Figure 4.132 System > Statistics > Time Based > Flow Based
The following table describes the items in the previous figure.
Item
Reporting Methods
Rule Id
Time Range
Match Conditions
Interfaces
Refresh
Add
Remove
To add a new time based flow:
EKI-9500 Series User Manual
Description
The methods for reporting the collected statistics at the end of every
configured interval. To change the reporting methods for all flow-
based statistics rules, click the Edit icon and select one or more meth-
ods. To reset the field to the default value, click the Reset icon. The
available reporting methods are:

None: The statistics are not reported to the console or an exter-
nal server. They can be viewed only by using the web interface
or by issuing a CLI command.

Console: The statistics are displayed on the console.

E-Mail: The statistics are sent to an e-mail address. The SNTP
server and e-mail address information is configured by using the
appropriate Email Alerts pages.

Syslog: The statistics are sent to a remote syslog server. The
syslog server information is configured on the Logging Hosts
page.
The number that identifies the flow-based statistics collection rule.
The name of the periodic or absolute time range to use for data collec-
tion. The time range is configured by using the Time Range Summary
and Time Range Entry Summary pages. The time range must be con-
figured on the system before the time-based statistics can be col-
lected.
The criteria a packet must meet to match the rule.
The interface or interfaces on which the flow-based rule is applied.
Only traffic on the specified interfaces is checked against the rule.
Click Refresh to update the screen.
Click Add to add a new time based flow.
Click Remove to remove the selected entries.
130