Table of Contents
Advertisement
Item
Transmit Manage-
ment Information
Refresh
Add
Edit
Remove
To add a new LLDP interface:
Click Switching > LLDP > Interface > Add.
The following table describes the items in the previous figure.
Item
Interface
Transmit
Receive
Notify
Transmit Manage-
ment Information
Optional TLV (s)
Port Description
EKI-9500 Series User Manual
Description
Indicates whether management address information for the local
device is transmitted in LLDPDUs. Other remote managers can obtain
information about the device by using its advertised management
address.
Click Refresh to update the screen.
Click Add to add a new LLDP interface.
Click Edit to edit the selected entries.
Click Remove to remove the selected entries.
Figure 4.228 Switching > LLDP > Interface > Add
Description
The interface associated with the rest of the data in the row. Only inter-
faces that have at least one LLDP setting enabled appear in the table.
In the Add LLDP Interface window, use this field to select the interface
with the LLDP settings to configure. In the Edit LLDP Interface window,
this field identifies the interface that is being configured.
The LLDP advertise (transmit) mode on the interface. If the transmit
mode is enabled, the interface sends LLDP Data Units (LLDPDUs) that
advertise the mandatory TLVs and any optional TLVs that are enabled.
The LLDP receive mode on the interface. If the receive mode is
enabled, the device can receive LLDPDUs from other devices.
The LLDP remote data change notification status on the interface. If
the notify mode is enabled, the interface sends SNMP notifications
when a link partner device is added or removed.
Indicates whether management address information for the local
device is transmitted in LLDPDUs. Other remote managers can obtain
information about the device by using its advertised management
address.
Select this option to include the user-configured port description in the
LLDPDU the interface transmits.
206
Advertisement
Table of Contents
