Rocker A R M Assembly Removal - Honda ACCORD HYBRID 2005 Service Manual

Cylinder Head
R o c k e r A r m A s s e m b l y R e m o v a l
FRONT
1. Remove the cylinder head cover (see page 6-32).
2. Loosen the locknuts and adjusting screws (A).
A
C )
o o
n
3. Remove the rocker shaft m o u n t i n g bolts and the
rocker a r m assembly.
- 1 U n s c r e w the rocker shaft m o u n t i n g bolts t w o
turns at a t i m e , to prevent d a m a g i n g the valves
or rocker a r m assembly.
- 2 W h e n r e m o v i n g the rocker arm assembly, do
not remove the rocker shaft m o u n t i n g bolts.
The bolts w i l l keep the springs and the rocker
a r m s on the shafts.
REAR
4. Remove the cylinder head cover (see page 6-32).
5. Loosen the locknuts and adjusting screws (A).
6. Remove the rocker shaft m o u n t i n g bolts and the
rocker arm assembly.
- 1 Unscrew the rocker shaft bridge m o u n t i n g
bolts and rocker shaft holder m o u n t i n g bolts
t w o turns at a t i m e , to prevent d a m a g i n g the
valves or rocker arm assembly.
- 2 W h e n r e m o v i n g the rocker a r m assembly, do
not remove the rocker shaft bridge m o u n t i n g
bolts and rocker shaft holder m o u n t i n g bolts.
The bolts will keep the rocker arms on the
shafts.
® ®
© ® ® ® ® ©
6-42