Tools, Test Equipment, And Supplies - Printronix P5000 Maintenance Manual

Chapter 1

Tools, Test Equipment, And Supplies

Tools, Test Equipment, And Supplies
For field level maintenance of the printer, you will need these tools:
Adapter, 1/4 in. hex to 1/4 in. square, Utica
Alcohol, anhydrous
Allen Wrench, 1/16 inch
Allen Wrench, 3/32 inch
Allen Wrench, 5/32 inch
Allen Wrench, 7/64 inch
Allen Wrench, 5/64 inch
ESD Wrist Strap
Feeler Gauge, 0.010 inch
Feeler Gauge, 0.011 inch
Feeler Gauge, 0.040 inch
Force Gauge, (Chatillon
Force Gauge, "Fish Scale" type, 0-16 oz.
Hex bit, 3/16 in., torque screwdriver
Hex bit, 3/32 in., torque screwdriver
Hex bit, 5/32 in., torque screwdriver
Hex bit, 5/64 in., torque screwdriver
Lubricant, Bearing (Printronix P/N 101805-001)
Nut Driver, 1/4 inch
Nut Driver, 5/16 inch
Nut Driver or Open End Wrench, 7/32 inch
Open End Wrench, 5/16 inch
Pliers, Grip Ring, External
Screwdriver, flat tip
Screwdriver, Phillips, #1
Screwdriver, Phillips, #2
Screwdriver, Torque, Utica TS-35
Tie Wraps, 4 inch
Torx
28
NY, Gauge-r, 0-20 lb., CAT 719-20)
™
T-10, T-15 Driver
®
HW-18
®