ABB AC500-S Safety User Manual page 441

Information about the used Function Block Parameters
Function Block
EStop_S1
OC_K1_K2
EDM_K1_K2
30.03.2017
Input Constant Value
S_StartReset FALSE
S_AutoReset FALSE
S_StartReset TRUE
S_AutoReset TRUE
StaticControl FALSE
S_StartReset FALSE
MonitoringTime T#200ms
Safety application examples
Example 3: Two-hand control > Additional notes
Description
No automatic reset when PES is started
No automatic reset, user reset/acknowl-
edge necessary
Automatic reset allowed when PES is
started
Automatic reset, no user reset/acknowl-
edge necessary
A dynamic change of the signal
Appl_Control (rising edge) is required
after block activation or a triggered safety
function (S_SafeControl at FALSE)
No automatic reset when PES is started
The maximum response time of both
feedback signals S_EDM1 and S_EDM2
is monitored to be within 200 msec.
AC500-S 441