Verification procedure for safe iParameter setting in AC500-S Safety I/Os > Verification procedure workflow
6.5.1 Verification procedure workflow
Personnel:
n
Safety application engineer of AC500-S Safety PLC
All required steps for verification procedure are described below:
1.
Go to "Tools/Options..." and activate "Show generic device configuration views" and instantiate a
given type of Safety I/O module (AI581-S, DI581-S or DX581-S) in the PS501 Control Builder Plus
V2.2.1 (or newer) / Automation Builder 1.0 (or newer) tree (DX581-S is used as an example):
30.03.2017
Checklists for AC500-S Commissioning
AC500-S
413