ABB AC500-S Safety User Manual page 304

Configuration and programming
AC500-S Libraries > SafetyBlocks_PLCopen_AC500_v22.lib
Function Block-Specific Error and Status Codes
Table 52: FB-specific error codes
DiagCode State Name
C001 Reset Error
C011 Discrepancy-
time Error 1
C012 Discrepancy-
time Error 2
Table 53: FB-specific status codes (no error):
DiagCode State Name
0000 Idle
8000 Normal
8001 Init
8002 Open Guard
Request
304
State Description and Output Setting
Static reset detected in state 8003.
Ready = TRUE
S_GuardMonitoring = FALSE
Error = TRUE
DiscrepancyTime elapsed in state 8004.
Ready = TRUE
S_GuardMonitoring = FALSE
Error = TRUE
DiscrepancyTime elapsed in state 8014.
Ready = TRUE
S_GuardMonitoring = FALSE
Error = TRUE
State Description and Output Setting
The function block is not active (initial state).
Ready = FALSE
S_GuardMonitoring = FALSE
Error = FALSE
Safety guard closed and Safe state acknowledged.
Ready = TRUE
S_GuardMonitoring = TRUE
Error = FALSE
Function block has been activated.
Ready = TRUE
S_GuardMonitoring = FALSE
Error = FALSE
Complete switching sequence required.
Ready = TRUE
S_GuardMonitoring = FALSE
Error = FALSE
AC500-S 30.03.2017