ABB AC500-S Safety User Manual page 283

Name Data Type
S_Mode2Sel BOOL
S_Mode3Sel BOOL
S_Mode4Sel BOOL
S_Mode5Sel BOOL
S_Mode6Sel BOOL
S_Mode7Sel BOOL
S_AnyModeSel BOOL
Error BOOL
DiagCode WORD
Notes: The X in parameter names "S_ModeX" or "S_ModeXSel" is a placeholder for digits 0 to 7.
30.03.2017
AC500-S Libraries > SafetyBlocks_PLCopen_AC500_v22.lib
Initial Value Description, Parameter Values
FALSE Indicates that mode 2 is selected and acknowl-
edged.
FALSE: Mode 2 is not selected or not active.
TRUE: Mode 2 is selected and active.
FALSE Indicates that mode 3 is selected and acknowl-
edged.
FALSE: Mode 3 is not selected or not active.
TRUE: Mode 3 is selected and active.
FALSE Indicates that mode 4 is selected and acknowl-
edged.
FALSE: Mode 4 is not selected or not active.
TRUE: Mode 4 is selected and active.
FALSE Indicates that mode 5 is selected and acknowl-
edged.
FALSE: Mode 5 is not selected or not active.
TRUE: Mode 5 is selected and active.
FALSE Indicates that mode 6 is selected and acknowl-
edged.
FALSE: Mode 6 is not selected or not active.
TRUE: Mode 6 is selected and active.
FALSE Indicates that mode 7 is selected and acknowl-
edged.
FALSE: Mode 7 is not selected or not active.
TRUE: Mode 7 is selected and active.
FALSE Indicates that any of the 8 modes is selected and
acknowledged.
FALSE: No S_ModeX is selected.
TRUE: One of the 8 S_ModeX is selected and
active.
Ä Table 32 "General Output Parameters"
FALSE
on page 267
Ä Table 32 "General Output Parameters"
16#0000
on page 267
AC500-S
Configuration and programming
283