ABB AC500-S Safety User Manual page 301

Table 51: FB Name: SF_GuardMonitoring
Name Data Type
VAR_INPUT
Activate BOOL
S_GuardSwitch1 BOOL
S_GuardSwitch2 BOOL
DiscrepancyTime TIME
S_StartReset BOOL
S_AutoReset BOOL
Reset BOOL
VAR_OUTPUT
Ready BOOL
S_GuardMoni- BOOL
toring
Error BOOL
DiagCode WORD
30.03.2017
AC500-S Libraries > SafetyBlocks_PLCopen_AC500_v22.lib
Initial Value Description, Parameter Values
FALSE Ä Table 31 "General Input Parameters"
on page 266
FALSE Variable.
Guard switch 1 input.
FALSE: Guard is open.
TRUE: Guard is closed.
FALSE Variable.
Guard switch 2 input.
FALSE: Guard is open.
TRUE: Guard is closed.
T#0ms Constant.
Configures the monitored synchronous time
between S_GuardSwitch1 and S_GuardSwitch2.
Ä Table 31 "General Input Parameters"
FALSE
on page 266 – Only Constant
Ä Table 31 "General Input Parameters"
FALSE
on page 266 – Only Constant
Ä Table 31 "General Input Parameters"
FALSE
on page 266
FALSE Ä Table 32 "General Output Parameters"
on page 267
FALSE Output indicating the status of the guard.
FALSE: Guard is not active.
TRUE: both S_GuardSwitches are TRUE, no
error and acknowledgment. Guard is active.
Ä Table 32 "General Output Parameters"
FALSE
on page 267
Ä Table 32 "General Output Parameters"
16#0000
on page 267
AC500-S
Configuration and programming
301