ABB AC500-S Safety User Manual page 325

Name Data Type
S_OSSD_Out BOOL
S_TestOut BOOL
TestPossible BOOL
TestExecuted BOOL
Error BOOL
DiagCode WORD
Notes: OSSD: Output Signal Switching Device.
30.03.2017
AC500-S Libraries > SafetyBlocks_PLCopen_AC500_v22.lib
Initial Value Description, Parameter Values
FALSE Safety related output indicating the status of the
ESPE.
FALSE: The sensor has a safety-related action
request or test error. TRUE: The sensor has no
safety-related action request and no test error.
TRUE Coupled with the test input of the sensor.
FALSE: Test request issued.
TRUE: No test request.
FALSE Feedback signal to the process.
FALSE: An automatic sensor test is not possible.
TRUE: An automatic sensor test is possible.
FALSE A positive signal edge indicates the successful
execution of the automatic sensor test.
FALSE:
- An automatic sensor test was not executed yet.
- An automatic sensor test is active.
- An automatic sensor test was faulty.
TRUE: A sensor test was executed successfully.
Ä Table 32 "General Output Parameters"
FALSE
on page 267
Ä Table 32 "General Output Parameters"
16#0000
on page 267
AC500-S
Configuration and programming
325