ABB AC500-S Safety User Manual page 199

DANGER!
The user is responsible to check that only certified Safety Libraries are used in his project.
Certified safety libraries and CRCs:
The user alone is responsible for all libaries which are created by him and referenced in the
project for use in safety applications.
You have to formally confirm in the "Checklist for creation of safety application program" that
no Non-safety libraries are used in your safety application.
NOTICE!
SM560-S is a single-task machine, thus, no task configuration is needed.
30.03.2017
Configuration and programming
System configuration and programming > Programming of AC500-S Safety CPU
Ä Chapter 4.6.1 "Overview" on page 224.
AC500-S 199