ABB AC500-S Safety User Manual page 384

Configuration and programming
AC500-S Libraries > SafetyBlocks_PLCopen_AC500_v22.lib
Function Block-Specific Error and Status Codes
Table 82: FB-specific error codes
DiagCode State Name
C001 Reset Error 1
C002 Reset Error 2
C010 Control Error
C111 Init Error
C211 Lock Error
Table 83: FB-specific status codes (no error):
DiagCode State Name
0000 Idle
8001 Init
384
State Description and Output Setting
Static Reset signal in state 8001.
Ready = TRUE
S_OutControl = FALSE
Error = TRUE
Static Reset signal in state 8003.
Ready = TRUE
S_OutControl = FALSE
Error = TRUE
Static signal at ProcessControl in state 8010.
Ready = TRUE
S_OutControl = FALSE
Error = TRUE
Simultaneous rising trigger at Reset and ProcessControl in state 8001.
Ready = TRUE
S_OutControl = FALSE
Error = TRUE
Simultaneous rising trigger at Reset and ProcessControl in state 8003.
Ready = TRUE
S_OutControl = FALSE
Error = TRUE
State Description and Output Setting
The function block is not active (initial state).
Ready = FALSE
S_OutControl = FALSE
Error = FALSE
Block activation startup inhibit is active. Reset required.
Ready = TRUE
S_OutControl = FALSE
Error = FALSE
AC500-S 30.03.2017