ABB AC500-S Safety User Manual page 381

Table 81: FB Name: SF_OutControl
Name Data Type
VAR_INPUT
Activate BOOL
S_SafeControl BOOL
ProcessControl BOOL
StaticControl BOOL
S_StartReset BOOL
S_AutoReset BOOL
Reset BOOL
VAR_OUTPUT
Ready BOOL
S_OutControl BOOL
30.03.2017
AC500-S Libraries > SafetyBlocks_PLCopen_AC500_v22.lib
Initial Value Description, Parameter Values
FALSE Ä Table 31 "General Input Parameters"
on page 266
FALSE Variable.
Control signal of the preceding safety FB.
Typical function block signals from the library
(e.g., SF_EStop, SF_GuardMonitoring, SF_Two-
HandControlTypeII, and/or others).
FALSE: The preceding safety FB's are in safe
state.
TRUE: The preceding safety FB's enable safety
control.
FALSE Variable or constant.
Control signal from the functional application.
FALSE: Request to set S_OutControl to FALSE.
TRUE: Request to set S_OutControl to TRUE.
FALSE Constant.
Optional conditions for process control.
FALSE: Dynamic change at ProcessControl
(FALSE => TRUE) required after block activation
or triggered safety function. Additional function
start required.
TRUE: No dynamic change at ProcessControl
(FALSE => TRUE) required after block activation
or triggered safety function.
Ä Table 31 "General Input Parameters"
FALSE
on page 266
Ä Table 31 "General Input Parameters"
FALSE
on page 266
Ä Table 31 "General Input Parameters"
FALSE
on page 266
FALSE Ä Table 32 "General Output Parameters"
on page 267
FALSE Controls connected actuators.
FALSE: Disable connected actuators.
TRUE: Enable connected actuators.
AC500-S
Configuration and programming
381