ABB AC500-S Safety User Manual page 394

Configuration and programming
AC500-S Libraries > SafetyBlocks_PLCopen_AC500_v22.lib
Table 86: FB-specific status codes (no error):
DiagCode State Name
0000 Idle
8001 Init
8010 Output Disable EDM control is not active. Timer starts when state is entered.
8000 Output Enable EDM control is active. Timer starts when state is entered.
394
State Description and Output Setting
The function block is not active (initial state).
Ready = FALSE
S_EDM_Out = FALSE
Error = FALSE
Block activation startup inhibit is active. Reset required.
Ready = TRUE
S_EDM_Out = FALSE
Error = FALSE
Ready = TRUE
S_EDM_Out = FALSE
Error = FALSE
Ready = TRUE
S_EDM_Out = TRUE
Error = FALSE
AC500-S 30.03.2017