Huawei NetEngine80E Configuration Manual - Reliability page 1372

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
Vrrp ID:
1
Vrrp bind interface:
GigabitEthernet1/1/2
Vrrp state:
slave
Bound service-instance-group number:
1
Batch-backup state: NA
Step 7 On CGN1 and CGN2, create NAT instances and bind them to service instance groups.
# On CGN1, create a NAT instance named nat and bind it to service instance group slz.
[CGN1] nat instance nat id 1
[CGN1-nat-instance-nat] service-instance-group slz
# On CGN2, create a NAT instance named nat and bind it to service instance group slz.
[CGN2] nat instance nat id 1
[CGN2-nat-instance-nat] service-instance-group slz
# Run the display nat instance nat command on CGN1 and CGN2 to view NAT configurations.
[CGN1]display nat instance
nat
nat instance nat id
1
service-instance-group
slz
nat address-group 1 group-id 1 202.38.160.100
202.38.160.105
nat outbound any address-group 1
[CGN2]display nat instance
nat
nat instance nat id
1
service-instance-group
slz
nat address-group 1 group-id 1 202.38.160.100
202.38.160.105
nat outbound any address-group 1
----End
Configuration Files
Configuration file of CGN1
#
sysname CGN1
#
service-ha hot-backup enable
#
service-location 1
location slot 1 engine 0
remote-backup interface GigabitEthernet 1/1/1 peer 1.1.1.2
Issue 02 (2014-09-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
12 CGN Backing Up HA Configuration
1355