Huawei NetEngine80E Configuration Manual - Reliability page 1326

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
l
Issue 02 (2014-09-30)
#
interface GigabitEthernet1/1/13.1
vlan-type dot1q 100
ip address 10.0.1.1 255.255.255.0
vrrp vrid 1 virtual-ip 10.0.1.100
admin-vrrp vrid 1
vrrp vrid 1 priority 120
vrrp vrid 1 preempt-mode timer delay 600
vrrp vrid 1 track interface GigabitEthernet1/1/12 reduced 50
vrrp vrid 1 track bfd-session 111 peer
vrrp vrid 1 track nat-instance nat1 reduced 50
vrrp vrid 2 virtual-ip 10.0.1.102
admin-vrrp vrid 2
vrrp vrid 2 priority 120
vrrp vrid 2 preempt-mode timer delay 600
vrrp vrid 2 track interface GigabitEthernet1/1/12 reduced 50
vrrp vrid 2 track bfd-session 111 peer
#
interface GigabitEthernet1/1/13.2
user-vlan 200 300
remote-backup-profile p1
bas
#
access-type layer2-subscriber default-domain authentication nat1
#
interface GigabitEthernet1/1/18.2
user-vlan 301 400
remote-backup-profile p2
bas
#
access-type layer2-subscriber default-domain authentication hsi
#
interface LoopBack100
ip address 1.1.1.1 255.255.255.255
return
Configuration file of Router B
#
sysname RouterB
#
user-group g2
#
slot 1
bas enable
#
nat instance nat1
add slot 2 master
add slot 4 slave
nat address-group 2
section 0 96.1.1.1 96.1.1.10
nat address-group 1-bak rui-slave
section 0 90.1.1.1 90.1.1.10
nat outbound any address-group 2
#
bfd
#
acl number 6100
rule 1 permit ip source user-group g2
#
traffic classifier c2 operator or
if-match acl 6100
#
traffic behavior b2
nat bind instance nat1
#
traffic policy p2
share-mode
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 Multi-node Backup Configuration
1309