Huawei NetEngine80E Configuration Manual - Reliability page 1323

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
View the p1 configuration on Router A.
<RouterA> display remote-backup-profile p1
-----------------------------------------------
Profile-Index
Profile-Name
Service
Remote-backup-service: s1
Backup-ID
track protocol
VRRP-ID
VRRP-Interface
Access-Control
State
Peer State
Interface
Backup mode
Slot-Number
Card-Number
Port-Number
Nas logic-port
Nas logic-ip
Nas logic-sysname
Traffic threshold
Traffic interval
View the s1 configuration on Router B.
<RouterB> display remote-backup-service s1
----------------------------------------------------------
Service-Index
Service-Name
TCP-State
Peer-ip
Source-ip
TCP-Port
Track-BFD
Track-interface0 : GigabitEthernet1/1/8
Last up time
----------------------------------------------------------
ip pool:
Failure ratio
Failure duration : 0
NAT instance : nat2
----------------------------------------------------------
Rbs-ID
Protect-type
Next-hop
Vlanid
Peer-ip
Vrfid
Tunnel-state
Tunnel-OperFlag: NORMAL
Spec-interface : GigabitEthernet1/1/5
Total users
Path 1:
Issue 02 (2014-09-30)
Out-interface : GigabitEthernet1/1/11
Vc-lable : 4294967295
User-number : 0
: 0x1000
: p1
: bras
: 10
: VRRP
: 1
: GigabitEthernet1/1/13.1
: --
: Master
: Slave
:
GigabitEthernet1/1/13.2
: hot
: 1
: 1
: 13
: Gigabitethernet 1/0/0
: 1.1.1.1
: nat
: 50(MB)
: 10(minutes)
: 3
: s1
: Connected
: 1.1.1.1
: 2.2.2.2
: 2046
: --
: 2012-05-21 11:18:13
hsi-1bak metric 20
hsi-2 metric 10
: 100%
: 3
: ip-redirect
: 10.1.1.1
: 0
: 10.1.1.1
: 0
: UP
: 0
Tunnel-index : 0x0
Out-interface : GigabitEthernet1/1/5
Vc-lable : 4294967295
User-number : 0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 Multi-node Backup Configuration
1306