Checking The Configurations - Huawei NetEngine80E Configuration Manual - Reliability

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
----End

12.5.6 Checking the Configurations

You can run corresponding display commands to check the configurations of the service
instance, service instance group, and binding between the service instance group and the HA
backup group.
Procedure
Step 1 Run the display service-instance-group service-instance-group-name command to check the
service instance group configuration.
Step 2 Run the display nat instance instance-name command to check the NAT instance configuration.
Step 3 Run the display ds-lite instance instance-name command to check the DS-Lite instance
configuration.
----End
Example
l
l
l
12.6 Configuration Examples
12.6.1 Example for Configuring HA Backup Between Service
Boards on a Single CGN Device for the NAT Service
This section provides an example for configuring HA backup between service boards on a single
CGN device for the NAT service, including scenario requirements, networking diagrams,
configuration roadmap, data preparation, configuration procedure, and configuration files.
Issue 02 (2014-09-30)
NOTE
One service group can be bound to only one HA backup group.
Run the display service-instance-group service-instance-group-name command to check
the service instance group configuration.
<HUAWEI> display service-instance-group test
service-instance-group test
service-location 1
Run the display nat instance instance-name command to check the NAT instance
configuration.
<HUAWEI> display nat instance nat
instance-name nat id 1
service-instance-group test
Run the display ds-lite instance instance-name command to check the DS-Lite instance
configuration.
<HUAWEI> display ds-lite instance dslite
instance-name dslite id 1
service-instance-group test
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
12 CGN Backing Up HA Configuration
1345