Checking The Statistics On Returned Test Packets - Huawei Quidway S6700 series Configuration Manual

Quidway S6700 Series Ethernet Switches
Configuration Guide - Reliability
Context
Do as follows on the device with an active interface on the link:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
test-packet start [ mac mac-address ] [ vlan vlan-id ] interface interface-type
interface-number [ -c count
Test packets are sent.
By default, the size of a test packet is 64 bytes; the number of test packets sent is 5.
The outbound interface for the test packets is the interface that connects the link to be tested.
----End
Follow-up Procedure
The parameter in this command cannot be modified when test packets are being sent.
Press Ctrl+C to stop sending test packets.

4.5.4 Checking the Statistics on Returned Test Packets

By viewing statistics of returned test packets, you can calculate the packet loss ratio.
Context
Do as follows on the device with an active interface on the link:
Procedure
Step 1 Run:
display test-packet result
Statistics of the returned test packets are displayed.
The displayed information includes:
l Number of sent test packets
l Number of received test packets
l Number of discarded test packets
l Total number of bytes of sent test packets
l Total number of bytes of received test packet
l Total number of bytes of discarded test packet
l Time to start the sending of test packet
l Time to end the sending of test packet
Issue 01 (2011-07-15)
| -s size ]
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Ethernet OAM Configuration-EFM
*
163