Edge-Core ECS4810-12M Layer 2 Management Manual page 264

| Spanning Tree Algorithm
C 8
HAPTER
Configuring Interface Settings for MSTP
The recommended range is listed in
The default path costs are listed in
W I
EB NTERFACE
To configure MSTP parameters for a port or trunk:
Click Spanning Tree, MSTP.
1.
Select Configure Interface from the Step list.
2.
Select Configure from the Action list.
3.
Enter the priority and path cost for an interface
4.
Click Apply.
5.
Figure 121: Configuring MSTP Interface Settings
To display MSTP parameters for a port or trunk:
Click Spanning Tree, MSTP.
1.
Select Configure Interface from the Step list.
2.
Select Show Information from the Action list.
3.
Figure 122: Displaying MSTP Interface Settings
– 264 –
Table 12 on page 253.
Table 13 on page 254.