Edge-Core ECS4810-12M Layer 2 Management Manual page 232

| VLAN Configuration
C 6
HAPTER
Configuring VLAN Translation
W I
EB NTERFACE
To configure VLAN translation:
Click VLAN, Translation.
1.
Select Add from the Action list.
2.
Select a port, and enter the original and new VLAN IDs.
3.
Click Apply.
4.
Figure 95: Configuring VLAN Translation
To show the mapping entries for VLANs translation:
Click VLAN, Translation.
1.
Select Show from the Action list.
2.
Figure 96: Showing the Entries for VLAN Translation
– 232 –