Target Port – The port that will mirror the traffic from the source port.
◆
(Range: 1-12)
W
I
EB
NTERFACE
To mirror packets based on a MAC address:
Click MAC Address, Mirror.
1.
Select Add from the Action list.
2.
Specify the source MAC address and destination port.
3.
Click Apply.
4.
Figure 102: Mirroring Packets Based on the Source MAC Address
To show the MAC addresses to be mirrored:
Click MAC Address, Mirror.
1.
Select Show from the Action list.
2.
Figure 103: Showing the Source MAC Addresses to Mirror
– 239 –
| Address Table Settings
C
7
HAPTER
Configuring MAC Address Mirroring