Edge-Core ECS4810-12M Layer 2 Management Manual page 273

W I
EB NTERFACE
To configure the response timers for automatic storm control:
Click Traffic, Auto Traffic Control.
1.
Select Configure Interface from the Step field.
2.
Enable or disable ATC as required, set the control response, specify
3.
whether or not to automatically release the control response of rate
limiting, set the upper and lower thresholds, and specify which trap
messages to send.
Click Apply.
4.
Figure 128: Configuring ATC Interface Attributes
– 273 –
| Congestion Control
C 9
HAPTER
Automatic Traffic Control