Show System - Edge-Core ECS4810-12M Layer 2 Management Manual

Hide thumbs Also See for ECS4810-12M Layer 2:

Table of Contents

This command displays settings for key command modes. Each mode

group is separated by "!" symbols, and includes the configuration mode

command, and corresponding commands. This command displays the

following information:

Refer to the example for the running configuration file.

show running-config (607)

This command displays system information.

show system

Normal Exec, Privileged Exec

For a description of the items shown by this command, refer to

"Displaying System Information" on page

If any POST test indicates "FAIL," contact your distributor for

MAC address for the switch

SNMP community strings

SNMP trap authentication

RMON alarms settings

Users (names and access levels)

VLAN database (VLAN ID, name and state)

Multiple spanning tree instances (name and interfaces)

Interface settings and VLAN configuration settings for each interface

IP address for management VLAN

Any configured settings for the console port and Telnet

| System Management Commands

System Status