Table of Contents
Advertisement
show system
This command displays system information.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
• For a description of the items shown by this command, refer to "Displaying
System Information" on page 4-1.
• The POST results should all display "PASS." If any POST test indicates
"FAIL," contact your distributor for assistance.
Example
Console#show system
System Description: 24/48 L2/L4 IPV4/IPV6 GE Switch
System OID String: 1.3.6.1.4.1.259.6.10.84
System information
System Up time: 0 days, 1 hours, 23 minutes, and 44.61 seconds
System Name
System Location
System Contact
MAC Address (Unit1):
Web Server:
Web Server Port:
Web Secure Server:
Web Secure Server Port:
Telnet Server:
Telnet Server Port:
Jumbo Frame:
POST Result:
DUMMY Test 1 ................. PASS
DRAM Test .................... PASS
Timer Test ................... PASS
PCI Device 1 Test ............ PASS
I2C Bus Initialization ....... PASS
Switch Int Loopback Test ..... PASS
Fan Speed Test ............... PASS
Done All Pass.
Console#
show users
Shows all active console and Telnet sessions, including user name, idle time, and IP
address of Telnet client.
Default Setting
None
: [NONE]
: [NONE]
: [NONE]
00-20-1A-DF-9C-A0
Enabled
80
Enabled
443
Enable
23
Disabled
34
show system
34-7
Hide quick links:
Advertisement
Chapters
Table of Contents
