Logging Console - Hirschmann RS20 Reference Manual

CLI Commands: Base

4.4.4 logging console

This command enables logging to the console. The <severitylevel> value is
specified as either an integer from 0 to 7 or symbolically through one of the
following keywords: emergency (0), alert (1), critical (2), error (3), warning
(4), notice (5), informational (6), debug (7).
Default
disabled; critical
Format
logging console [severitylevel]
Mode
Global Config
no logging console
U
This command disables logging to the console.
Format
no logging console
CLI L2B
Release 4.0 11/07
4.4 Syslog Commands
95