Servicing The Server Node Battery (Cru) - Oracle Database Appliance X6-2-HA Manual

Install Primary HBA PCIe Card in Motherboard
3. Return the server node to operation.
a. Install the server node top cover.
See
Install the server node into the system.
b.
See
Power on the server node.
c.
See
4. Clear the primary HBA card fault.
a.
Log in to the server node as root using the Oracle ILOM CLI.
b. To view server node faults, type the following command to list all known
faults on the server node:
->
Oracle ILOM lists all known faults, for example:
SP/faultmgmt
Targets:
0 (/SYS/MB/HBA)
Properties:
Commands:
cd
show
c.
To clear the internal PCIe card fault, use the set command. For example:
->
Are you sure you want to clear /SYS/MB/HBA (y/n)?
Set 'clear_fault_action' to 'true'

Servicing the Server Node Battery (CRU)

Note -
2, Oracle Database Appliance X4-2, Oracle Database Appliance X5-2 or Oracle Database
Appliance X6 series. Refer to the preceding chapters in this document for information on
servicing those systems.
The Oracle Database Appliance Version 1 battery maintains the date and time for the Oracle
ILOM service processor when the server node is removed from the system and, therefore, is
156 Oracle Database Appliance Service Manual • June 2017
"Install Server Node Top Cover" on page
"Install Server Node Into System Chassis" on page
"Powering On Oracle Database Appliance Version 1" on page
show /SP/faultmgmt
set /SYS/MB/HBA clear_fault_action=true
Information in this appendix does NOT apply to Oracle Database Appliance X3-
207.
208.
210.
y