Servicing The Battery; Remove The Battery - Oracle SPARC T5-2 Service Manual

Servicing the Battery

The battery is located inside the chassis. See
The battery maintains system time when the server is powered off and disconnected from AC
power. If the IPMI logs indicate a battery failure, replace the battery.
These topics describe how to service the battery.
"Remove the Battery" on page 117
■
"Install the Battery" on page 118
■
Related Information
"Detecting and Managing Faults" on page 31
■

Remove the Battery

This procedure requires that you handle components that are sensitive to ESD. This
Caution -
sensitivity can cause the component to fail. To avoid damage, ensure that you follow antistatic
practices as described in
A customer can perform this procedure. The server must be completely powered down
before performing this procedure. See
information about cold-service procedures.
1. Prepare for servicing.
a. Attach an antistatic wrist strap.
b. Power off the server and unplug power cords from the power supplies.
See "Removing Power From the Server" on page
c. Extend the server to maintenance position.
"Motherboard Component Locations" on page
"ESD Measures" on page
"Component Service Categories" on page 57
54.
58.
Servicing the Battery
21.
for more
117