Command Sources; Profidrive" Default Setting - Siemens SINAMICS G150 Operating Instructions Manual
Converter cabinet units 75 kw to 1500 kw
Hide thumbs
Also See for SINAMICS G150:
- Manual (1843 pages) ,
- Operating instructions manual (680 pages) ,
- Operating manual (240 pages)
Table of Contents
Advertisement
6.4
Command sources
6.4.1
"PROFIdrive" default setting
Prerequisites
The "PROFIdrive" default setting was chosen during commissioning:
• STARTER:
• AOP30:
Command sources
Figure 6-9
Priority
The command source priorities are shown in the diagram "Command sources -
AOP30←→PROFIdrive".
Note
The emergency OFF and motor protection signals are always active (regardless of the
command source).
All of the supplementary setpoints are deactivated for LOCAL master control.
Converter cabinet units
Operating Instructions, 03/2012, A5E03263466A
"PROFIdrive"
"5: PROFIdrive"
Command sources - AOP30 ←→ PROFIdrive
Operation
6.4 Command sources
275
Advertisement
Table of Contents
