Safety Information; Warnings - Siemens SINAMICS G150 Operating Instructions Manual

Safety information

1.1

Warnings

Hazardous voltages are present when electrical equipment is in operation.
Severe personal injury or substantial material damage may result if these warnings are not
observed.
Only qualified personnel are permitted to work on or around the equipment.
This personnel must be thoroughly familiar with all the warnings and maintenance
procedures described in these operating instructions.
The successful and safe operation of this device is dependent on correct transport, proper
storage and installation, as well as careful operation and maintenance.
National safety guidelines must be observed.
Five safety rules
When carrying out any kind of work on electrical devices, the "five safety rules" according to
EN 50110 must always be observed:
1. Disconnect the system.
2. Protect against reconnection.
3. Make sure that the equipment is de-energized.
4. Ground and short-circuit.
5. Cover or enclose adjacent components that are still live.
Certification
The following certificates:
● EC declaration of conformity
● Certificate of compliance with order
can be found under "Safety and Operating Instructions" in the documentation folder.
Converter cabinet units
Operating Instructions, 03/2012, A5E03263466A
WARNING
DANGER
1
15