Terminal Module For Activation Of "Safe Torque Off" And "Safe Stop 1" (Option K82) - Siemens SINAMICS G150 Operating Instructions Manual

Electrical installation
4.11 Other connections
Shield connection of the TB30 on the Control Unit
Figure 4-46
The permissible bending radii for the cables must not be exceeded when the cables are
being installed.
4.11.27 Terminal module for activation of "Safe Torque Off" and "Safe STOP 1" (option
K82)
Description
Option K82 (terminal module for activating "Safe Torque Off" and "Safe Stop 1") is used for
isolated activation via a variable control-voltage range of the safety functions already present
in the standard version, which can also be used without option K82.
Use option K82 to activate the following Safety Integrated functions (terminology according
to EN 61800-5-2):
● Safe torque off (STO)
● Safe Stop 1 (SS1, time-controlled)
180
TB30 shield connection
Converter cabinet units
Operating Instructions, 03/2012, A5E03263466A