Siemens SINAMICS G150 Operating Instructions Manual page 274

Operation
6.3 Basic information about the drive system
The BICO parameter interconnection can be implemented in different data sets (CDS, DDS,
MDS, etc.). The different interconnections in the data sets are activated by switching the
data sets. Interconnections across drive objects are also possible.
Internal encoding of the binector/connector output parameters
The internal codes are needed, for example, to write BICO input parameters via PROFIdrive.
Figure 6-6
Example 1: interconnecting digital signals
Suppose you want to operate a drive via terminals DI 0 and DI 1 on the Control Unit using
jog 1 and jog 2.
Figure 6-7
272
Internal encoding of the binector/connector output parameters
Interconnection of digital signals (example)
Converter cabinet units
Operating Instructions, 03/2012, A5E03263466A